• 家图标
  • 箭头图标 产品
  • 箭头图标Pendant 发射机s (20 - 86系列)

Pendant 发射机s

20 - 86系列

The 20-86 is an extremely small, high specification, IP67额定 pendant paging transmitter capable of transmitting text directly to pocket pagers. Ideally suited to retail assistance, rest/care home emergency applications or duress environments.

The 20-86 series is an extremely small, IP67额定, high specification keyring or pendant POCSAG paging transmitter, available with 1 to 5 buttons as required. Powered by a standard CR2032 coin cell.

它很小, comfortable and discreet and can be hand-held, 锁在钥匙圈上, held in the pocket or worn on a lanyard around the neck.

A front panel LED is used to confirm a message is being sent and/or to indicate a flat battery.

The Salcom "Stuck Button" feature prevents the battery going flat if a button has been accidentally held on.

20-86's has a receiver which can be used, with appropriate transceivers, to provide visual message received acknowledgements.

The 20-86 range of products are POCSAG direct to pager transmitters, allowing low cost systems to be developed since intermediate receivers and transmitters are not required for short range applications.

20-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once operating frequency has been set the 20-86 messages can be changed using programming software with an optional programming lead.

Although the 20-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having 证明 to be effective in some cases between floors and across buildings.

Designed and manufactured by Salcom here in 新西兰, it is a leading robust, 证明, reliable top of class multifunctional pendant transmitter.

  • 超高频操作
  • 体积小、重量轻 & 离散
  • Internal cell battery
  • Individually programmable buttons
  • Robust design for harsh environments and use
  • Ideal for near distance paging, assistance, duress or operation of lights or doors etc.
  • Capable of operating on existing in-house paging systems
  • 1 or 5-button variants, each button individually configurable with its own 35-character message
  • Simple 遥测 solution
  • Dust and waterproof rated to IP67
规范
选项 20-86-0001: Single button
20-86-0015: Five buttons blue
20-86-0005: Five buttons black
频率范围 440-470MHz - UHF
Frequency Selection 通过软件
电力供应 3V, CR2032 button cell
电池寿命 Approx 5,000 transmissions
Approx 5 years standby
Battery Replacement Battery door on rear case
电力消耗 Standby: <0.5μA
传输:26马
传输能量 10mW
信道间隔 25 khz, 12.5 khz, 6.25千赫
调制 FSK与NRZ数据
偏差 ±4.5 khz,±2.3千赫,±1.0赫兹
Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
波特率 512, 1200, or 2400
Configuration Application Sacoto (Salcom Configuration Tool software)
消息格式 POCSAG; Alphanumeric or Numeric
编程电缆 20-51-0001 (USB)
串行端口 9600, N, 8, 1; 3V TTL (accessible only when case open for
编程)
天线 内部天线
指标 Red LED (centre): Solid = Transmitting, Rapid flashing = Low battery
Green LED’s (left and right): On = Received message or command
Environmental Protection IP67
Operating Temperature -10ºC to +55ºC (+14ºF to +131ºF)
重量 30g含电池
Enclosure Dimensions 72mm x 43mm x 15mm (L x W x H)
外壳材料 ABS塑料
外壳火焰等级 UL94-HB
螺丝 PH-00司机
螺杆扭矩 0.06 - 0.08N*m
类型的审批 CE, FCC and AS/NZS Pending
产品宣传册
20-86 Configuration Tool Sacoto 1.1.7
  • 信息

    The 20-86 series is an extremely small, IP67额定, high specification keyring or pendant POCSAG paging transmitter, available with 1 to 5 buttons as required. Powered by a standard CR2032 coin cell.

    它很小, comfortable and discreet and can be hand-held, 锁在钥匙圈上, held in the pocket or worn on a lanyard around the neck.

    A front panel LED is used to confirm a message is being sent and/or to indicate a flat battery.

    The Salcom "Stuck Button" feature prevents the battery going flat if a button has been accidentally held on.

    20-86's has a receiver which can be used, with appropriate transceivers, to provide visual message received acknowledgements.

    The 20-86 range of products are POCSAG direct to pager transmitters, allowing low cost systems to be developed since intermediate receivers and transmitters are not required for short range applications.

    20-86 transmitters support up to 5 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once operating frequency has been set the 20-86 messages can be changed using programming software with an optional programming lead.

    Although the 20-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having 证明 to be effective in some cases between floors and across buildings.

    Designed and manufactured by Salcom here in 新西兰, it is a leading robust, 证明, reliable top of class multifunctional pendant transmitter.

  • Details
    • 超高频操作
    • 体积小、重量轻 & 离散
    • Internal cell battery
    • Individually programmable buttons
    • Robust design for harsh environments and use
    • Ideal for near distance paging, assistance, duress or operation of lights or doors etc.
    • Capable of operating on existing in-house paging systems
    • 1 or 5-button variants, each button individually configurable with its own 35-character message
    • Simple 遥测 solution
    • Dust and waterproof rated to IP67
  • 规范
    规范
    选项 20-86-0001: Single button
    20-86-0015: Five buttons blue
    20-86-0005: Five buttons black
    频率范围 440-470MHz - UHF
    Frequency Selection 通过软件
    电力供应 3V, CR2032 button cell
    电池寿命 Approx 5,000 transmissions
    Approx 5 years standby
    Battery Replacement Battery door on rear case
    电力消耗 Standby: <0.5μA
    传输:26马
    传输能量 10mW
    信道间隔 25 khz, 12.5 khz, 6.25千赫
    调制 FSK与NRZ数据
    偏差 ±4.5 khz,±2.3千赫,±1.0赫兹
    Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
    波特率 512, 1200, or 2400
    Configuration Application Sacoto (Salcom Configuration Tool software)
    消息格式 POCSAG; Alphanumeric or Numeric
    编程电缆 20-51-0001 (USB)
    串行端口 9600, N, 8, 1; 3V TTL (accessible only when case open for
    编程)
    天线 内部天线
    指标 Red LED (centre): Solid = Transmitting, Rapid flashing = Low battery
    Green LED’s (left and right): On = Received message or command
    Environmental Protection IP67
    Operating Temperature -10ºC to +55ºC (+14ºF to +131ºF)
    重量 30g含电池
    Enclosure Dimensions 72mm x 43mm x 15mm (L x W x H)
    外壳材料 ABS塑料
    外壳火焰等级 UL94-HB
    螺丝 PH-00司机
    螺杆扭矩 0.06 - 0.08N*m
    类型的审批 CE, FCC and AS/NZS Pending
  • 手册 & 下载
    产品宣传册
    20-86 Configuration Tool Sacoto 1.1.7

Does your project needs a reliable wireless component?

Not sure how your project can benefit from our systems? 与…取得联系
discuss your requirements with our wireless engineers.